Best book for SSC JE Mechanical

(Last Updated On: October 19, 2017)

Best book for SSC JE Mechanical

Best book for SSC JE Mechanical


Syllabus of SSC JE Mechanical
(For both Objective and Conventional Type Papers)


Theory of Machines and Machine Design

Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots.

Engineering Mechanics and Strength of Materials

Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Buckling of columns – Euler’s and Rankin’s theories, Thin walled pressure vessels

Thermal Engineering

Properties of Pure Substances : p-v & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status. Definition of dryness fraction of steam, degree of superheat of steam. h-s chart of steam (Mollier’s Chart).

1st Law of Thermodynamics : Definition of stored energy & internal energy, 1st Law of Thermodynamics for cyclic process, Non Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation.

2nd Law of Thermodynamics : Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation for ideal gas processes. Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility.

Air standard Cycles for IC engines : Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency.

IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication.

Rankine cycle of steam : Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump work.

Boilers; Classification; Specification; Fittings & Accessories : Fire Tube & Water Tube Boilers.

Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeration Plant; Nozzles & Steam Turbines

Fluid Mechanics & Machinery

Properties & Classification of Fluids : ideal & real fluids, Newton’s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids.

Fluid Statics : Pressure at a point.

Measurement of Fluid Pressure : Manometers, U-tube, Inclined tube.

Fluid Kinematics : Stream line, laminar & turbulent flow, external & internal flow, continuity equation.

Dynamics of ideal fluids : Bernoulli’s equation, Total head; Velocity head; Pressure head; Application of Bernoulli’s equitation.

Measurement of Flow rate Basic Principles : Venturimeter, Pilot tube, Orifice meter.

Hydraulic Turbines: Classifications, Principles.

Centrifugal Pumps : Classifications, Principles, Performance.

Production Engineering

Classification of Steels : mild steal & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques i.e. TIG, MIG, etc. (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes.

Best book for SSC JE Mechanical


SSC JE: Mechanical Engineering – T

This book contains previous year Objective and Conventional solved papers of SSC-JE (2007-2015). The topic wise segregation will help the students in learning the particular topic/subject. Special focus has been given to make the solutions/explanations in detailed and stepwise manner with lucid language so that any candidate can understand easily. Apart from SSC-JE, this book is also highly recommended to the students preparing for State Level JE examinations, DMRC JE Examination etc.

Best book for SSC JE Mechanical

Mechanical Engineering (Conventional and Objective Type): Conventional and Objective Types

An ideal book for Mechanical Engineering

A good guide is essential when it comes to preparing for exams that decide your fate. Thus, it is best to rely on a book that can give you an insight on a wide range of aspects related to the subject. Mechanical Engineering (Conventional and Objective Type) is an apt book for those who are looking to brush up their knowledge and be well prepared for the exam.

Major contents covered:

For all those who are preparing to appear in examinations pertaining to careers in the IAS (Engineering group), U.P.S.C. (Engineering Services) or other B.Sc. Engineering related fields, this proves to be one of the best compiled versions in its category.

The primary contents of the book include the following:

  • Material Strength
  • Engineering Mathematics
  • Hydraulics and Fluid Mechanics
  • Heating and Cooling
  • Engine type and details
  • Production Management
  • Industrial Engineering

The book uses simple language to describe each content in a brief manner such that it offers optimum aid to the learners. The book covers innumerable questions that follow the objective type pattern. The book also provides answers that are highly descriptive with the use of examples. It also contains questions that reflect the question paper pattern thus making it easier for the student to get an idea of what’s in store for him/her on the day of the exam.

Best book for SSC JE Mechanical

SSC JE Mechanical Engineering Guide

GKP’s SSC-JE series has been designed to equip the diploma engineers appearing for Junior Engineer recruitment examination conducted by Staff Selection Commission. This series provides a wide range of study material in the form of study guides & practice papers for Mechanical, Civil, and Electrical. In addition to it, the series also provides with 24×7 access to premium content on android app and web portal to help students thoroughly prepare for the new online exam pattern.


  • Chapters include theory for conceptual clarity with 2 practice exercises
  • Exercise-I for concept building questions
  • Exercise-II provides previous years questions (2008 to 2015)
  • Also includes SSC-JE 2017 Solved Paper.

SSC Junior Engineers (Mechanical) Exam Guide (Popular Master Guide)

The SSC Jr. Engineers (Mechanical) Exam Guide in English is an excellent guide for students appearing for Engineers Mechanical Exam and SSC Junior. These exams are conducted by the Central Public Works Department, for recruitment to various posts.

Students will find the book divided into eight chapters. The first chapter is dedicated to Mechanical Engineering followed by separate chapters on thermal engineering, flow of fluids, strengths of materials, production engineering and theory of machines. At the end of the book, the students will find that the topics of general intelligence, general awareness and reasoning, each of which has been covered separately. The book is well designed and is published by Ramesh Publishing House.

The pattern of the book is based on the latest recommendations for the students. The book also has solved papers of the previous years. All questions come with detailed explanations for better understanding of the topics. The book has been published by RPH Board and, since its first edition; it has been quite popular with students and teachers.

It can be used to boost the preparation for competitive exams and can be used for explanations on important topics. In this book students get 558 pages of solid information.

Best book for SSC JE Mechanical

SSC CWC/MES 2015 Mechanical Engineering (Junior Engineering Recruitment Exam) Includes Solved Paper 2013-2014: Mechanical Engineer – Junior Engineering Recruitment Exam


Table of Contents:
  • About the Examination
  • Solved Paper – 2014
  • Paper I (Objective Type)
  • Solved Paper – 2013
  • Paper I (Objective Type)
  • Paper II (Convent ional Type)

Part – 1: General Engineering

  • Flow of Fluids
  • Thermal Engineering
  • Production Engineering
  • Strength of Materials
  • Theory of Machines

Part – 2: General Awareness

  • Science and Technology
  • World
  • Literature
  • Sports
  • Indian History
  • Geography
  • Indian Polity
  • Current Affairs

Part – 3: General Intelligence and Reasoning

  • Series Completion
  • Coding – Decoding
  • Analogy
  • Blood Relations
  • Symbol Based Statement Conclusion
  • Cubes and Dices
  • Directions
  • Analytical Reasoning
  • Calendar
  • Visual Reasoning
  • Figure Formation and Analysis
  • Pattern Perception
  • Series
  • Paper Cutting
  • Syllogism

Best book for SSC JE Mechanical